Skid Steer Grader Attachment (Laser System Optional)

Price: $16,300.00
free ground shipping
(No reviews yet) Write a Review
SKU:
SE50504372 | 0
Condition:
New
Weight:
1,200.00 LBS

Calculate Shipping Cost

Our Grader Blade attachment can turn your skid steer into a high-performance grading machine. It features a 96" wide blade, control box for in-cab hydraulic control of angle and tilt, and a reversible/replaceable cutting edge. Also features a proportional current valve to gradually adjust the blade height, angle and tilt. It is ready to accept a laser control system for perfect grading. Comes complete with hoses and flat face couplers.

Use the optional laser system with an our grader for a perfect grade every time! You can enjoy simple, precise control that results in material and labor savings. The transmitter features +/-10% X axis grade range, 0.5% to +25% Y axis grade range and high accuracy up to 3,000 ft. The receiver features bright green "on-grade" indicators and red "off-grade" indicators, and simple, one cable attachment. Installation and setup of the laser kit takes an estimated 10 to 15 hours.

*Wear Items, Hoses, and Couplers are not covered under warranty

*Laser Kit and End Plates are not included unless added prior to checkout.

1 Year Warranty (does not cover wear items or hoses & couplers)
Width:
96 in
Overall Length:
101 in
Overall Height:
46.5 in
Hydraulic Blade Adjustments:
Tilt / Angle / Height
Moldboard Width:
95.5 in
Moldboard Height:
15 in
Moldboard Width:
85 in
Moldboard Rotation Left & Right:
25 Degrees
Moldboard Tilt Up or Down:
25 Degrees
Reversible Moldboard Cutting Edge:
1/2 x 6 / 13 x 152 Double Bevel
Moldboard Shear Pin Protection:
5/16 / 8 Diameter Shear Pin (Soft)
3 -Hydraulic Cylinders (in/cm) PSI/bar:
2 / 5 Bore x 12 / 30 Stroke 3500 / 241
Flat-Faced Couplers Included:
1/2 / 13 Body
Grader Control Valve:
Electric Solenoid Operated
In-Cab Remote Control:
Standard
Recommended Min. Skid Steer HP:
40 hp
Wheel Bearings:
Greaseable Tapered Roller
Tire Size:
18-1/2 x 8-1/2 x 8
Operating Weight:
1195 lbs
If manual required please contact us

Phone: 1-888-888-1085

Contact Page

Shipping & Delivery Terms of Notice and Agreement

Special Note: Please be advised that all shipments and deliveries require the following:

1. Shipping and handling charges are based on the total weight of your order. Oversized or excessively heavy items may have an additional shipping cost. This charge may not be calculated until the order is being prepared. We will notify you if there is an increase in the shipping charge on your order prior to billing and shipping.

2. We ship via Old Dominion, XPO Logistics, Estes, UPS, FedEx, US Postal Service, or Broker Hire Subcontractors in the continental US. Shipments to Alaska, Hawaii, Canada, and overseas will have additional shipping costs applied.

3.Please allow around 4-30 business days for delivery of non-back ordered items in the continental US. Please also allow additional time for shipments to Alaska, Hawaii, Canada, and/or any international orders.

4. Entire orders will be shipped together, when and if possible.

5. Someone MUST be present to receive the delivery and to sign the receipt of goods.

6. It is required that a machine be present with the proper lift capacity to off-load freight as lift-gate service is NOT provided unless otherwise agreed to and paid for in advance.

7. No re-consignments or deliveries to other locations or addresses will be permitted once an order has been placed and the delivery address has been confirmed. In the rare case a client demands this, additional fees will be applied and must be paid in full prior to delivery of goods.

8. It is the client’s responsibility to call the shipping company to arrange a time of delivery. We DO NOT guarantee that any prior-notice call or notice will be given once the order ships.

9. Any non-commercial ship-to-address will incur additional fees. In addition, any other special delivery requests such as Lift-Gate Service, Residential Address, Limited Access, Inside Delivery, Notify/Call Ahead Notice on Delivery, Secure Access, Job site or Construction Site, Farms or remote area deliveries will incur additional fees.

10. It is the client’s responsibility to inspect goods upon their arrival. In the rare case of receiving an item that has been damaged during transit, it is the client’s responsibility to note any and all damage on the Bill of Lading (BOL). We encourage you to take photos to document any damage and to notify Spartan Equipment via email at orders@spartanequipment.com. Clients will also be responsible for filing a freight claim with the carrier. Spartan Equipment will do everything we can to be an advocate on your behalf and assist in negotiating with the carrier to remedy the situation.

11. In the equally rare case of a lost shipment, please notify us if you have not received your order in a timely manner. Our goal is to stock the majority of items we advertise to sell and meet our client’s needs promptly. If your order has been lost in transit, we will work with the carrier to find it. Please give us up to two weeks to notify the carrier about the issue and to locate your order.

12. Transactions shipped within the state of Maryland are subject to Maryland State Sales Tax. Items picked up at our facility within Maryland MUST be done via appointment only and are also subject to State Sales Tax.

Related Products

Skid Steer Sod Roller Attachment

Skid Steer Sod Roller Attachment

Our Skid Steer Sod Roller's strong tubular frame handles rolls of sod up to 48" (1219 mm) wide, and its simple design requires no hydraulics. The Sod Roller attachment handles rolls up to 60" (1524...

Price: $1,500.00
Skid Steer Tree Fork Attachment

Skid Steer Tree Fork Attachment

The Skid Steer Tree Fork Attachment positions plants, trees, and large shrubs quickly and with ease. Use for lifting, carrying, and lowering balled and container grown trees & shrubs. They are...

Price: $5,500.00
Mini Skid Steer Digger Attachment

Mini Skid Steer Digger Attachment

Our Mini Skid Steer Digger Attachment is an excellent choice for removing and transplanting small shrubs, bushes and trees. We offer the Digger Attachment for various brands and makes. Please choose...

Price: $1,300.00
Mini Skid Steer Sod Roller Attachment

Mini Skid Steer Sod Roller Attachment

Our Professional Series Sod Roller's strong tubular frame handles rolls of sod up to 48" (1219 mm) wide, and its simple design requires no hydraulics. The Sod Roller attachment handles rolls up to...

Price: $1,500.00