Mini Skid Steer Chipper (Toro Dingo Mount)

Price: $7,700.00
free ground shipping
(No reviews yet) Write a Review
SKU:
SE900789
Condition:
New
Weight:
286.00 LBS

Calculate Shipping Cost

The Spartan Mini Skid Steer chipper attaches in seconds and are driven solely by your mini skid steer's hydraulics. This unit is available as a standard flow model. This unit will make short work of any troublesome debris.

  • Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
  • Requires 11-15 gpm flow
How difficult is it to perform maintenance on the machine?
This unit is designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
 
How long will the chipper blades last?
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed machines will have longer blade life.
 
What are these skid steer chippers designed for?
This chipper is designed to effectively eliminate wood, brush, and other organic material while using your skid steer as the power unit.
 
What is the capacity and hydraulic flow requirements of the skid steer chipper?
The maximum capacity is 4.5" and requires at least 11 to 15 gpm of hydraulic flow.
 
*Wear Items, Hoses, and Couplers are not covered under warranty
1 Year Warranty (does not cover wear items or hoses & couplers)
Chipper Capacity (in):
up to 4.5"
L x W x H (in):
41" x 28" x 40"
Chipper Disc:
Cantilever 14x1/49 lbs., rotates at 2,700 rpm at 11 gpm - 3,700 at 15 gpm
Skid GPM Required:
11 gpm - 15 gpm
Feed Opening:
4.5" x 5"
Chipper Chute Opening:
12" x 13"
Chipper Blades:
2 reversible steel chipper blades with 4 sided adjustable anvil
Discharge:
Ground
Rotor Weight:
49 lbs
Operating Weight:
286 lbs
If manual required please contact us

Phone: 1-888-888-1085

Contact Page

Shipping & Delivery Terms of Notice and Agreement

Special Note: Please be advised that all shipments and deliveries require the following:

1. Shipping and handling charges are based on the total weight of your order. Oversized or excessively heavy items may have an additional shipping cost. This charge may not be calculated until the order is being prepared. We will notify you if there is an increase in the shipping charge on your order prior to billing and shipping.

2. We ship via Old Dominion, XPO Logistics, Estes, UPS, FedEx, US Postal Service, or Broker Hire Subcontractors in the continental US. Shipments to Alaska, Hawaii, Canada, and overseas will have additional shipping costs applied.

3.Please allow around 4-30 business days for delivery of non-back ordered items in the continental US. Please also allow additional time for shipments to Alaska, Hawaii, Canada, and/or any international orders.

4. Entire orders will be shipped together, when and if possible.

5. Someone MUST be present to receive the delivery and to sign the receipt of goods.

6. It is required that a machine be present with the proper lift capacity to off-load freight as lift-gate service is NOT provided unless otherwise agreed to and paid for in advance.

7. No re-consignments or deliveries to other locations or addresses will be permitted once an order has been placed and the delivery address has been confirmed. In the rare case a client demands this, additional fees will be applied and must be paid in full prior to delivery of goods.

8. It is the client’s responsibility to call the shipping company to arrange a time of delivery. We DO NOT guarantee that any prior-notice call or notice will be given once the order ships.

9. Any non-commercial ship-to-address will incur additional fees. In addition, any other special delivery requests such as Lift-Gate Service, Residential Address, Limited Access, Inside Delivery, Notify/Call Ahead Notice on Delivery, Secure Access, Job site or Construction Site, Farms or remote area deliveries will incur additional fees.

10. It is the client’s responsibility to inspect goods upon their arrival. In the rare case of receiving an item that has been damaged during transit, it is the client’s responsibility to note any and all damage on the Bill of Lading (BOL). We encourage you to take photos to document any damage and to notify Spartan Equipment via email at orders@spartanequipment.com. Clients will also be responsible for filing a freight claim with the carrier. Spartan Equipment will do everything we can to be an advocate on your behalf and assist in negotiating with the carrier to remedy the situation.

11. In the equally rare case of a lost shipment, please notify us if you have not received your order in a timely manner. Our goal is to stock the majority of items we advertise to sell and meet our client’s needs promptly. If your order has been lost in transit, we will work with the carrier to find it. Please give us up to two weeks to notify the carrier about the issue and to locate your order.

12. Transactions shipped within the state of Maryland are subject to Maryland State Sales Tax. Items picked up at our facility within Maryland MUST be done via appointment only and are also subject to State Sales Tax.

Related Products

Mini Skid Steer Trencher

Mini Skid Steer Trencher

Our Professional Series Mini Skid Steer Trencher Attachment is the perfect trench digging solution for your mini skid steer or walk behind machine. Cut through the toughest earth with ease with...

Price: $5,900.00